Ti
m
e
r
19
GB
You can record a preset radio station from a
specified time.
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 12) and set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 13).
2
Press CLOCK/TIMER SET.
“PLAY” appears.
3
Press
.
or
>
repeatedly to select
“REC”, then press ENTER.
“ON TIME” appears and the hour
indication flashes.
4
Set the time to start recording.
Press
.
or
>
repeatedly to set the
hour, then press ENTER.
The minute indication flashes.
Press
.
or
>
repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
Rec Timer settings and the desired station
appear, then the original display returns.
6
Load a recordable tape.
7
Press
?/1
to turn off the system.
Other operations
Notes
• If you use the Rec Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
• If the system is on about 15 seconds before the preset
time, the Rec Timer will not be activated.
• The volume is reduced to minimum during
recording.
• You cannot activate the Play Timer and the Rec
Timer at the same time.
• After you have set Rec Timer, do not operate the
system until the recording ends.
• The Rec Timer is canceled automatically after the
Rec Timer has been activated.
Timer recording radio
programs
— Rec Timer
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “REC”
appears, then press ENTER.
Change the setting
Start over from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
2
Press
.
or
>
repeatedly until “OFF”
appears, then press ENTER.
