T
une
r
41
GB
To erase the station name
1
Tune in the preset station you want to erase
the station name.
2
Press NAME EDIT/SELECT.
3
Press CLEAR repeatedly to erase the name.
4
Press ENTER.
To change the character
In step 3 or 4, press
m
or
M
repeatedly until
the character to be changed flashes, press
CLEAR to erase the character, then repeat steps
3 and 4.
To add a character
After steps 1 and 2, press
m
or
M
repeatedly
until the cursor comes to the point you want to
add a character, then proceed to step 3.
Note
When you tune in a station that provides RDS services,
the station name is overwritten.
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name display. RDS is
available only on FM stations.*
Note
RDS may not work properly if the station you are tuned
in is not transmitting the RDS signal properly or if the
signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the display.
To check the RDS information
Each time you press DISPLAY on the unit, the
display changes cyclically as follows:
Station name*
t
Frequency
t
Clock display
t
Sound Field status
t
Volume
* If the RDS broadcast is not properly received, the
station name may not appear in the display.
Using the Radio Data
System (RDS)
