36
GB
Be sure to change the value in the Setup Display
when you move the speakers.
The default settings are underlined.
Notes
• When adjusting speakers, the sound may cut off for a
moment.
• If each of the front and surround speakers are not
placed at an equal distance from your listening
position, set the distance of the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
Adjusting the speaker volume
and level
1
Press DVD SETUP in stop mode.
The Setup Display appears.
2
Press
v
or
V
repeatedly to select
“SPEAKER SETUP”, then press
ENTER.
3
Press
v
or
V
repeatedly to select
“TEST TONE”, then press ENTER.
4
Press
v
or
V
repeatedly to select “ON”,
then press ENTER.
You will hear the test tone from each
speaker in sequence.
5
From your listening position, adjust the
value of “BALANCE” and “LEVEL”
using
v/V/b/B
.
The test tone is emitted from the selected
speaker.
6
Press ENTER when you finish
adjusting.
7
Press
v
or
V
repeatedly to select
“TEST TONE”, then press ENTER.
8
Press
v
or
V
repeatedly to select
“OFF”, then press ENTER.
To return to the default settings
Select the item to be returned to the default
setting and press CLEAR.
To change the volume of all
speakers at once
Adjust using or –.
Tip
To adjust the balance or the level without listening to
the test tone, select “BALANCE” or “LEVEL” in step
3 and press ENTER, then adjust the balance or level
using
v
or
V
and press ENTER.
FRONT
3.0 m
Front speaker distance from the
listening position can be set in
0.2 meter increments from 1.0 to
7.0 meters.
CENTER
3.0 m
Center speaker distance can be moved
up to 1.6 meters closer to the listening
position, from the front speakers in
0.2 meter increments.
SURROUND
3.0 m
Surround speaker distance can be
moved up to 4.6 meters closer to the
listening position, from the front
speakers in 0.2 meter increments.
