23
GB
L
is
ten
ing
t
o
m
u
s
ic th
roug
h a
BL
U
E
T
OOTH
connec
tio
n
depending on the connected BLUETOOTH
device.
Once a pairing operation is performed, it does
not have to be performed again. In the following
cases, however, a pairing operation must be
performed again:
Pairing information was erased when the
BLUETOOTH device was repaired.
You attempt to pair the system with more
than 9 BLUETOOTH devices.
This system can pair with up to 9 BLUETOOTH
devices. If you pair another BLUETOOTH
device after pairing with 9 devices was
performed, pairing information of the device
that was connected with the system first is
overwritten with that of the new device.
Pairing registration information of this system
is erased from the connected device.
If you initialize the system or erase the
pairing history with the system, all the
pairing information will be erased.
The sound of this system cannot be sent to a
BLUETOOTH speaker.
“Passkey” may be called “Passcode,” “PIN code,”
“PIN number” or “Password,” etc.
To check the address of a
connected BLUETOOTH device
Press DISPLAY while the name set on the
connected BLUETOOTH device is shown in
the display window. The BLUETOOTH device
address appears in the display window for
about 8 seconds.
To cancel the connection with the
BLUETOOTH device
Disconnect the BLUETOOTH connection on
the BLUETOOTH device. “BLUETOOTH”
appears in the display window.
Depending on the device, the connection
may be canceled automatically when you
stop playback.
To erase the pairing registration
information
1
Select “Delete Link” after step 3 on
“Pairing the system with a BLUETOOTH
device and listening to music” (page 22),
then press ENTER.
2
Press
/
to select “Ok,” then press
ENTER.
“Complete!” appears in the display window and
all the pairing information is erased.
Note
If you have erased the pairing information, you
cannot make a BLUETOOTH connection unless
pairing is performed again.
After step 1 on “Pairing the system with a
BLUETOOTH device and listening to music,”
operate the BLUETOOTH device to connect
with the system, then start playback and
adjust the volume on the BLUETOOTH
device.
Tip
Stop playback on the BLUETOOTH device before
connecting the system to the BLUETOOTH
device.
Listening to music through
a registered device
Summary of Contents for CMT-SX7
Page 50: ......
Page 51: ......
Page 52: ... 2015 Sony Corporation Printed in China 4 567 663 12 1 ...