30
GB
Setting the wireless
signal ON/OFF
When the unit is turned on, you can control
a wireless network or BLUETOOTH signal.
The default setting is on.
1
Turn on the unit.
2
If
flashes in the display
window, press and hold BACK
and
of the unit.
3
After “RF Off” (wireless signal is
off) or “RF On” (wireless signal is
on) appears, release the button.
Tip
When this setting is set to off, the wireless
network function and BLUETOOTH function are
not available.
When this setting is off, the unit is turned on by
the smartphone/tablet by one-touch action
(NFC) on the unit.
When this setting is off, the BLUETOOTH/
Network Standby mode cannot be set.
When this setting is set to off while the
BLUETOOTH/Network Standby mode is on, the
BLUETOOTH/Network Standby mode turns off.
When this setting is off, the unit and
BLUETOOTH device cannot be paired.
Even when this setting is off, a wired connection
can still be used.
Adjusting the sound
Adjusts the sound to your preference.
Selecting “DSEE HX” produces better quality
sound of a compressed file, such as MP3.
1
Press MENU.
2
Press
/
to select “Sound
Menu,” then press ENTER.
3
Press
/
to select “BASS,”
“TREBLE,” or “DSEE HX,” then
press ENTER.
BASS:
Adjusts the bass sound.
TREBLE:
Adjusts the treble sound.
DSEE HX:
Upgrades the sound quality
better than CD or MP3. Complements
the treble of a compressed file, such as
MP3, and upgrades to a higher level of
sampling frequency and number of bits
from its original numeric. Select to
“Auto.” (The default setting is “Auto.”)
To use the Clear Audio+ function
The Clear Audio+ function activates and
sound is set to Sony’s recommended
settings by pressing CLE.
Summary of Contents for CMT-SX7
Page 50: ......
Page 51: ......
Page 52: ... 2015 Sony Corporation Printed in China 4 567 663 12 1 ...