11
GB
Ge
tt
ing
s
ta
rte
d
Note
Find a location and an orientation that provide
good reception, and then fix the antennas to a
stable surface (window, wall, etc.).
Keep the antennas away from the unit, power
cord and other AV components to avoid picking
noise.
Secure the end of the FM lead antenna with
adhesive tape.
To prepare the AM loop antenna
(CMT-SX7 only)
1
Fold the antenna stand as illustration.
2
Attach the projecting part of the frame to
the antenna stand.
OPTICAL IN (optical input) jack
Connect to an output jack of the optional
external components with an optical
cable (not supplied).
Note
The system is not compatible with a format
other than PCM. Set the output format of the
external component to PCM.
(USB REAR) port
Connect a computer or WALKMAN®
which is compatible with High-
Resolution Audio. Use the USB cable (not
supplied) (page 19). If you connect a
WALKMAN® to the unit, use an optional
High-Resolution Audio USB Adaptor WM-
PORT Cable* (not supplied) and the USB
cable (not supplied).
You can also use this as a USB-DAC.
* Optional High-Resolution Audio USB Adaptor
WM-PORT Cable can be ordered from your
nearest Sony dealer.
LAN connector
Connect network equipment with a LAN
cable (not supplied) (page 26).
AC power cord
Inserting the
batteries
Insert two supplied R03 (size AAA) batteries,
side first, matching the polarities shown
below.
Note
With normal use, the batteries should last for
about 6 months.
Do not mix an old battery with a new one or mix
different types of batteries.
If you do not use the remote for a long period of
time, remove the batteries to avoid damage
from battery leakage and corrosion.
Side view
Fold both parts of the
stand.
Press until it clicks.
Summary of Contents for CMT-SX7
Page 50: ......
Page 51: ......
Page 52: ... 2015 Sony Corporation Printed in China 4 567 663 12 1 ...