36
4
Press +/– repeatedly until “SET REC”
appears.
After “SET REC” scrolls across the display,
“
c
REC” appears.
5
Press ENTER.
“ON TIME” appears, then the hour
indication flashes.
AM1200
REC
c
6
Set the starting time.
Press +/– repeatedly to set the hour, then
press ENTER.
The minute indication begins flashing next.
PM 600
REC
c
Press +/– repeatedly to set the minute, then
press ENTER.
“OFF TIME” appears, then the hour
indication flashes again.
7
Set the stopping time by repeating step
6.
The starting time, the stopping time,
“TUNER”, and the preset station appear in
turn, then the original display returns.
8
Press
?/1
to turn off the system.
When recording starts, the volume level is
automatically set to the minimum.
To check the settings
Press TIMER SELECT repeatedly until “
c
REC”
disappears, then press TIMER SELECT
repeatedly until “
c
REC” appears again.
The preset items appear in turn.
To turn off the REC Timer
Press TIMER SELECT repeatedly until “
c
REC”
disappears. To turn the timer on again, press
TIMER SELECT repeatedly until “
c
REC”
appears, then press
?/1
to turn off the system.
Tip
Once you set the REC Timer, the time settings will
remain in the system’s memory until you change
them, even when you turn the system or the REC
Timer off. The settings that were last used will be in
effect when you turn the timer on again.
Notes
• The system will turn on 15 seconds before the
specified starting time.
• If the power is on at the specified starting time,
recording will not occur.
• The timer will not operate if the starting time and
the stopping time are the same.
• When you have set the Sleep Timer, the REC Timer
will not operate until the Sleep Timer function is
turned off.
• You cannot operate the Daily Timer and the REC
Timer at the same time.
Timer-activated recording of
radio programs (continued)
