1-5
12
Adjusting the brightness and
contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the
currently selected input connector.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
.
Then press the control button.
The CONTRAST/BRIGHT menu appears on the screen.
3
Move the control button up or down to highlight
6
or
. Then press the control button.
4
Move the control button up or down to adjust the
contrast (
6
) or brightness (
). Then press the
control button.
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE (
) of the
OPTION (
) menu, the following CONTRAST/BRIGHT menu
appears on the screen.
You cannot adjust the contrast (
6
) or brightness (
) on this
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE (
) of the OPTION (
) menu.
For more information about using the sRGB mode, see
“Adjusting the color of the picture (COLOR)” on page 15.
Adjusting the centering of the
picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3
Move the control button up or down to select
for
horizontal adjustment, or
for vertical adjustment.
Then press the control button.
4
Move the control button up or down to adjust the
centering.
Adjusting the size of the picture
(SIZE/CENTER)
This setting is stored in memory for the current input signal.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3
Move the control button up or down to select
for
horizontal adjustment, or
for vertical
adjustment. Then press the control button.
4
Move the control button up or down to adjust the
size.
CONTRAST
s
:
/
RGB
/
I
BR GHT
MENU
EX I T :
13
US
Automatically sizing and centering
the picture (AUTO)
You can easily adjust the picture to fill the screen by using the
SIZE/CENTER menu.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
SIZE/CENTER and press the control button.
The SIZE/CENTER menu appears on the screen.
3
Move the control button up or down to select
(AUTO). Then press the control button.
The adjustment window appears on the screen.
4
Move the control button up or down to select OK.
Then press the control button.
The picture automatically fills the screen.
Notes
• If you do not want to use the AUTO function, select CANCEL in step 4.
• This function is intended for use with a computer running Windows or
similar graphic user interface software that provides a full-screen
picture. It may not work properly if the background color is dark or if
the input picture does not fill the screen to the edges (such as an MS-
DOS prompt).
• The displayed image moves for a few seconds while this function is
performed. This is not a malfunction.
Adjusting the shape of the picture
(GEOMETRY)
The GEOMETRY settings allow you to adjust the rotation and
shape of the picture.
The
(rotation) setting is stored in memory for all input signals.
All other settings are stored in memory for the current input
signal.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
GEOMETRY and press the control button.
The GEOMETRY menu appears on the screen.
3
Move the control button up or down to select the
desired adjustment item. Then press the control
button.
The adjustment bar appears on the screen.
4
Move the control button up or down to make the
adjustment. Then press the control button.
For more information about using the RESET mode, see
“Resetting the adjustments (RESET)” on page 18.
Select
To
rotate the picture
expand or contract the picture sides
shift the picture sides to the left or right
adjust the picture width at the top of the screen
shift the picture to the left or right at the top of the
screen
0
RESET
reset all the GEOMETRY adjustments to the
factory setting levels. Select OK.