1-6
14
Adjusting the convergence
(CONVERGENCE)
The CONVERGENCE settings allow you to adjust the quality of
the picture by controlling the convergence. The convergence
refers to the alignment of the red, green, and blue color signals.
If you see red or blue shadows around letters or lines, adjust the
convergence.
These settings are stored in memory for all input signals.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
CONVERGENCE and press the control button.
The CONVERGENCE menu appears on the screen.
3
Move the control button up or down to select the
desired adjustment item. Then press the control
button.
The adjustment bar appears on the screen.
4
Move the control button up or down to make the
adjustment. Then press the control button.
For more information about using the RESET mode, see
“Resetting the adjustments (RESET)” on page 18.
Adjusting the picture quality
(SCREEN)
The SCREEN settings allow you to degauss (demagnetize) the
monitor manually and adjust the picture quality by controlling the
moire and landing.
• If the color is not uniform or picture is fuzzy, degauss the
monitor (DEGAUSS).
• If elliptical or wavy patterns appear on the screen, cancel the
moire (CANCEL MOIRE).
• If the color is irregular at the corners of the screen, adjust the
landing (LANDING) (CPD-G520 only).
The monitor is automatically demagnetized (degaussed) when the
power is turned on.
The screen is degaussed for about 2 seconds. If a second degauss
cycle is needed, allow a minimum interval of 20 minutes for the
best result.
The CANCEL MOIRE setting is stored in memory for the current
input signal. All other settings are stored in memory for all input
signals.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
SCREEN and press the control button.
The SCREEN menu appears on the screen.
3
Move the control button up or down to select the
desired adjustment item. Then press the control
button.
The adjustment bar appears on the screen.
4
Move the control button up or down to make the
adjustment. Then press the control button.
Select
To
horizontally shift red or blue shadows
vertically shift red or blue shadows
T
TOP
vertically shift red or blue shadows at the top of
the screen
B
BOTTOM
vertically shift red or blue shadows at the bottom
of the screen
0
RESET
reset all the CONVERGENCE adjustments to
the factory setting levels. Select OK.
15
US
*
Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
** The LANDING and RESET functions are for CPD-G520 only.
Note
The picture may become fuzzy when the CANCEL MOIRE function is
activated.
Adjusting the color of the picture
(COLOR)
The COLOR settings allow you to adjust the picture’s color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor’s color to a printed picture’s colors.
You can set the color temperature for each of the video input
connectors.
x
Select the COLOR mode
There are 4 types of adjustment modes, EASY, PRESET,
EXPERT, and sRGB. The default setting is EASY which can be
adjustable from 5000K to 11000K.
If you want to set another mode (other than EASY), select the
desired mode in the OPTION (
) menu. Then adjust the
selected mode in each COLOR (
) menu.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
OPTION and press the control button.
The OPTION menu appears on the screen.
3
Move the control button up or down to highlight
COLOR MODE. Then press the control button.
4
Move the control button up or down to select the
COLOR mode.
Select
To
DEGAUSS
degauss the monitor. To degauss the monitor
manually, select OK.
CANCEL
MOIRE
adjust the degree of moire cancellation until
the moire* is at a minimum
LANDING
**
reduce any color irregularities in the screen’s
top left corner to a minimum
LANDING
**
reduce any color irregularities in the screen’s
top right corner to a minimum
LANDING
**
reduce any color irregularities in the screen’s
bottom left corner to a minimum
LANDING
**
reduce any color irregularities in the screen’s
bottom right corner to a minimum
0
RESET
**
reset all the SCREEN adjustments to the
factory setting levels. Select OK.
INPUT
PICTURE EFFECT
MENU
OK
1
2
Example of moire
MENU
E
OPT ON
I
COLOR MODE
EASY
EXPERT
s RGB
PRESET
X I T :
(continued)
