14-GB
Symptom
The connection between the printer
and the Cyber-shot Station cannot be
established
Unable to print images
Printing is canceled
The CHARGE lamps light up when no
camera is placed on the Cyber-shot
Station
Unable to shoot an image when
pressing the SHUTTER button
Unable to start the interval shooting
Interval shooting is continuously
working even when “Memory Stick” is
full
Cause/Solution
• The printer may not be PictBridge-compliant.
t
Ask the printer manufacturer whether your
printer is PictBridge-compliant.
• The printer is not set for the connection with the
camera.
t
Be sure that the printer is on to connect with
the camera.
• The Cyber-shot Station is not connected to the
printer properly.
t
Check that the Cyber-shot Station and the
printer are properly connected using the USB
cable.
• The camera is not placed on the Cyber-shot Station
correctly.
t
Place the camera correctly.
• The printer is not turned on.
t
Turn on the printer.
For further infomation, refer to the operating
instructions supplied with the printer.
• Movies cannot be printed.
• Still images modified with a computer or still
images taken using other than the camera
compatible with this Cyber-shot Station may not
be able to be printed.
• You disconnected the USB cable before the
mark disappeared.
• You removed the camera from the Cyber-shot
Station before the
mark disappeared.
• When the camera was not placed on the Cyber-
shot Station, you have pressed the Control buttons
(in the order of
v
/
b
/
V
/
B
), then pressed the
POWER button and now the Cyber-shot Station is
in the demonstration mode.
t
To cancel the demonstration mode, discconect
the AC adaptor once and connect it again.
Alternatively, place the camera on the Cyber-
shot Station.
• The AC adaptor is disconnected.
t
Connect the AC adaptor properly.
• The camera is turned off.
t
Turn on the camera.
• The camera is not set to the Shooting mode.
t
Set the Shooting mode.
For further infomation, refer to the operating
instructions supplied with the camera.
• The AC adaptor is disconnected.
t
Connect the AC adaptor properly.
• The interval selector is not set correctly.
t
Set the interval selector correctly.
• Interval shooting automatically work up to 12
times. When the “Memory Stick” is full, still
images will not be recorded.
