Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
GB
Drop Sensor (HDR-PJ50E/
PJ50VE/XR160E)
Your camcorder detects that it is dropping,
and protects the internal hard disk.
On
Activates the drop sensor. When it is detected
that the camcorder is dropping, you may
not be able to record or play back images
correctly, to protect the internal hard disk.
When dropping is detected, appears.
Off (
)
Deactivates the drop sensor.
Notes
Set [Drop Sensor] to [On] when you use
the camcorder. Otherwise, if you drop the
camcorder, you may damage the internal hard
disk.
In a non-gravity situation, the drop sensor
activates. When you record images during an
activity such as roller-coasting or skydiving,
you can set [Drop Sensor] to [Off] so as not to
activate the drop sensor.
Battery Info
You can check the estimated remaining
capacity of the battery.
To close the battery information screen
Touch
.
Demo Mode
When the camcorder is connected to a wall
outlet (wall socket) and no operation is
performed for about 10 minutes with the
movie recording mode or the Event View
mode set, a demonstration movie starts
playing.
On
The demonstration appears.
Off
The demonstration does not appear.
Notes
In the default setting, the demonstration
movie is in the Event Index. If you delete the
demonstration movie, you cannot recover it.
A movie you have recorded will be registered as
the demonstration movie if it satisfies all of the
following conditions.
The movie is protected
The movie is the one that was recorded first
The movie is saved on the internal recording
media
The movie is recorded with high definition
image quality (HD)
Tips
When you set this item to [On] and touch
, the demonstration starts playing.
If you make one of the following operations, the
demonstration will be suspended. (It appears
again if no operation is performed for about 10
minutes.)
Pressing START/STOP or PHOTO
Touching the screen during the
demonstration
Pressing
(View Images)
Pressing MODE
Operating the power zoom lever (only when
you are using the projector).
