Ta
ble
of
Op
e
MENU/Settin
In
96
GB
Warning indicators and
messages
If a code starting with a letter of the alphabet appears, the self-diagnosis function on the camera
is working. The last two digits (indicated by
ss
) will differ depending on the state of the
camera.
If you cannot solve the problem even after trying the following corrective actions a few times,
the camera may need repair.
Contact your Sony dealer or local authorized Sony service facility.
C:32:
ss
• There is trouble with the camera’s hardware. Turn the power off and on again.
C:13:
ss
• The camera cannot read or write data on the memory card. Try turning off and on the camera again, or
taking out and inserting the memory card several times.
• The internal memory has experienced a format error, or an unformatted memory card is inserted.
Format the internal memory or the memory card (page 70).
• The inserted memory card cannot be used with the camera, or the data is damaged. Insert a new
memory card.
E:61:
ss
E:62:
ss
E:91:
ss
• A camera malfunction has occurred. Initialize the camera (page 66), then turn the power on again.
If the following messages appear, follow the instructions.
• The battery level is low. Charge the battery pack immediately. Depending on the conditions of use or
the type of battery, the indicator may flash even though there are still 5 to 10 minutes of remaining
battery time left.
For use with compatible battery only
• The battery inserted is not an NP-BN1 (supplied) battery pack.
System error
• Turn the power off and then on again.
Self-diagnosis display
Messages