109
Tr
ou
ble
s
h
o
o
tin
g
Others
Symptom
Cause/Solution
Your camera does not work.
• You are not using an “InfoLITHIUM” battery pack. Use an “InfoLITHIUM” battery pack (page 120).
• The battery level is low. (The
E
indicator appears.) Charge the battery pack (page 14).
• Connect the AC Adaptor securely to the DC IN jack of your camera and to a wall outlet (wall socket)
• Properly install the camera to the Cyber-shot Station (page 12).
The power is on, but the camera does
not work.
• The built-in microcomputer is not working properly. Disconnect, and then, after one minute, reconnect
all power sources and turn on the camera. If this does not work, press the RESET button with a fine-
tipped object, then turn the power on again. (This will clear the date and time settings, etc.) (page 101)
You cannot identify an indicator on the
screen.
• Check the indicator (pages 123 to 126).
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave for about an hour at room
temperature for the moisture to evaporate before use (page 118).
The camera becomes warm when you
use it for the long time.
• This is not a malfunction.