14
Charging the battery pack
,
Open the battery cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 19).
•
Your camera operates with the
“InfoLITHIUM” NP-FT1 battery pack (T type)
(supplied). You can use only T type battery
pack (page 120).
,
Install the battery pack, then
close the battery cover.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
Battery insertion slot
Facing the
V
marks on the side
of the battery pack in the same
direction as the
V
mark on the
battery insertion slot, insert the
battery pack until it is locked.
,
Connect the AC Adaptor
(supplied) to the DC IN jack of
the Cyber-shot Station
(supplied).
Connect the DC plug with the
v
mark
facing up.
•
Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
•
Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
1
2
3
DC plug
AC Adaptor
DC IN jack
Cyber-shot Station
Getting started