16
To charge the battery pack
only using the AC Adaptor
You can charge the battery pack without the
Cyber-shot Station, such as during your
travels. Connect the DC plug of the AC
Adaptor to the camera with the apex of the
v
mark on the camera and the apex of the
v
mark on the DC plug facing.
• Be sure to turn off your camera when
charging the battery pack (page 19).
•
When placing the camera, make sure the LCD
screen is facing up.
•
After charging the battery pack, disconnect the
AC Adaptor both from the multi connector of
the camera and from a wall outlet (wall socket).
Battery remaining indicator
The battery remaining indicator on the LCD
screen shows the remaining shooting or
viewing time.
•
In standby mode, the battery remaining time for
still image shooting is indicated.
•
The displayed time remaining may not be
correct under certain circumstances or
conditions.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC
Adaptor at a temperature of 25°C (77°F).
•
The charging time may become longer under
certain circumstances or conditions.
To remove the battery pack
Open the battery cover. Slide the battery
eject lever in the direction of the arrow, and
remove the battery pack.
•
Be careful not to drop the battery pack when
removing it.
Power cord
(mains lead)
To wall outlet
(wall socket)
2
AC Adaptor
3
Multi connector
DC plug
1
Battery pack
Charging time
(min.)
NP-FT1 (supplied)
Approx. 150
60min
Remaining indicator
Remaining time
Battery eject lever