33
Sho
o
ti
ng
imag
es
,
Press PHOTO fully down.
An approximately 5-second movie shot
before a still image and an approximately 3-
second movie after the still image are also
recorded.
When “Recording” disappears, you can
shoot the next image or operate the camera.
When a back movie is being recorded,
is
indicated on the lower part of the LCD
screen.
To return to the normal recording
Set the HYBRID switch to the left position.
•
Movie size is set to 320×240 (15fps).
•
You cannot use the following functions in
Hybrid mode.
– Speed Burst
– Multi Burst
– Exposure Bracket
– Auto review
•
When [Hybrid Rec] is set to [Pre Rec] on the
Setup screen, you can record only an
approximately 5-second movie before shooting
a still image.
•
The shutter sound is recorded even when
[Beep] is set to [Off] on the Setup screen.
•
In hybrid shooting, the battery quickly runs low
as compared with a normal shooting.
•
A pre/post movie may become shorter in the
following cases.
– Shooting the next image continuously.
– Changing the mode with MODE or the
HYBRID switch before or after shooting.
•
Status of the LCD screen is directly recorded in
a pre/post movie. So, the following status is
also recorded.
– AE lock adjusting sound and its lock sound
– The light of AF illuminator
– The screen status when setting a function,
such as picture effect, just before shooting a
still image
– Self-timer sound
– Beep sound during an operation (When you
do not want to record a beep sound, set
[Beep] to [Off] or [Shutter].
•
For details on how to play back images
recorded in Hybrid mode, see page 44.
VGA
101
F2.0
250
[ 5]
FINE
60
min
2
