80
Direct printing
Even if you do not have a computer, you
can easily print images shot using your
camera by connecting the camera to a
PictBridge compliant printer. For
preparation, you only set the USB
connection on the Setup screen and connect
the camera to the printer with the USB
cable.
Using a PictBridge compliant printer easily
prints the index print*.
* An index print function may not be provided
depending on a printer.
•
Using the AC Adaptor is recommended to
prevent the power from turning off partway
through printing.
•
You cannot print movies.
•
When an error notification is received from the
connected printer, the
indicator flashes for
approximately five seconds. Check the
connected printer.
Single print
Index print
•
If you arrange the same image side by side,
select [This image] in single-image mode, then
set [Index] to [On] (page 82).
•
The number of images printed on a single index
print differs according to the printer.
Preparing the camera
Set the USB mode on the camera to connect
the camera with a printer.
Before operation
Set the menu to the Setup screen (pages 54
and 116).
a
Select
(Setup 2) with
V
,
then select [USB Connect]
with
v
/
V
/
B
.
b
Select [PictBridge] with
B
/
v
,
then press
z
.
The USB mode is set.
Control button
2
2
1
Setup 2
Video Out:
Clock Set:
NTSC
File Number:
USB Connect:
PictBridge
Normal
PTP
