background image

Ad
di

tiona

l inf

o

rm

atio

n

63

Warning and notice messages 

Various messages appear on the LCD screen. Check the corresponding descriptions 
in the following list.

Message

Meaning

NO MEMORY STICK

No “Memory Stick” has been inserted.

SYSTEM ERROR

Turn the power off and on again.

MEMORY STICK ERROR

The inserted “Memory Stick” cannot be 
used with your camera, or the “Memory 
Stick” is damaged or not inserted correctly.

FORMAT ERROR

Failed to format the “Memory Stick.”

MEMORY STICK LOCKED

The write-protect tab on the “Memory 
Stick” is set to the LOCK position.

NO MEMORY SPACE

The capacity of the “Memory Stick” is full, 
and you cannot record or copy images.

NO FILE

No image has been recorded on the 
“Memory Stick.”

FILE ERROR

An error occurred while playing back the 
image.

FILE PROTECT

The image is protected against erasure. 

for “InfoLITHIUM” battery only

The battery is not the “InfoLITHIUM” 
type.

NOT ENOUGH MEMORY

The images you want to copy are too big to 
copy with your camera.

COPY ERROR

Copying was not performed correctly, or 
the “Memory Stick” was removed during 
copying.

DIRECTORY ERROR

A directory with the same name already 
exists.

IMAGE SIZE OVER

You are playing back an image of a size that 
cannot be played back with your camera.

INVALID OPERATION

You are playing back a file that was created 
on equipment other than your camera.

E

The battery level is low or zero.

-

The image is protected.

Summary of Contents for Cyber-shot DSC-P1









































































Reviews: