background image

2

To prevent fire or shock hazard, do 
not expose the unit to rain or 
moisture.

If you have any questions about this product, you 
may call: 

Sony Customer Information Services Center
1-800-222-SONY (7669)

The number below is for the FCC related matters 
only.

Regulatory Information

CAUTION

You are cautioned that any changes or 
modifications not expressly approved in this 
manual could void your authority to operate this 
equipment.

WARNING

For Customers in the U.S.A.

This symbol is intended to 
alert the user to the presence 
of uninsulated “dangerous 
voltage” within the product's 
enclosure that may be of 
sufficient magnitude to 
constitute a risk of electric 
shock to persons.

This symbol is intended to 
alert the user to the presence 
of important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the appliance.

Declaration of Conformity

Trade Name: SONY
Model No.: DSC-S60
Responsible Party: Sony Electronics Inc.
Address:  16450 W. Bernardo Dr,

San Diego, CA 92127U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions: (1) This device may not cause 
harmful interference, and (2) this device must 
accept any interference received, including 
interference that may cause undesired 
operation.

Declaration of Conformity

Trade Name: SONY
Model No.: DSC-S90
Responsible Party: Sony Electronics Inc.
Address:  16450 W. Bernardo Dr,

San Diego, CA 92127U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following 
two conditions: (1) This device may not cause 
harmful interference, and (2) this device must 
accept any interference received, including 
interference that may cause undesired 
operation.

Summary of Contents for Cyber-shot DSC-S60








































































































Reviews: