152
GB
Ta
ble
of
Op
e
MENU/Settin
In
Warning indicators and
messages
If a code starting with a letter of the alphabet appears, the self-diagnosis function on the camera
is working. The last two digits (indicated by
ss
) will differ depending on the state of the
camera.
If you cannot solve the problem even after trying the following corrective actions a few times,
the camera may need repair. Contact your Sony dealer or local authorized Sony service facility.
C:32:
ss
• There is trouble with the camera’s hardware. Turn the power off and on again.
C:13:
ss
• The camera cannot read or write data on the memory card. Try turning off and on the camera again, or
taking out and inserting the memory card several times.
• The internal memory has experienced a format error, or an unformatted memory card is inserted.
Format the internal memory or the memory card (page 117).
• The inserted memory card cannot be used with the camera, or the data is damaged. Insert a new
memory card.
E:61:
ss
E:62:
ss
E:91:
ss
• A camera malfunction has occurred. Initialize the camera (page 105), then turn the power on again.
E:94:
ss
• There is a malfunction when writing or deleting data. Repair is required. Contact your Sony dealer or
local authorized Sony service facility. Be prepared to give all numbers in the error code beginning
from the E.
If the following messages appear, follow the instructions.
• The battery level is low. Charge the battery pack immediately. Depending on the conditions of use or
the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of
remaining battery time left.
For use with compatible battery only
• The battery inserted is not an NP-BN1 (supplied) battery pack.
Self-diagnosis display
Messages
