Ta
ble
of
Op
e
MENU/Settin
In
47
GB
Flash
1
Lower the lens cover to switch to shooting mode.
2
(Flash)
t
desired mode
When the buttons are not displayed on the left side of the LCD
screen, touch
.
• The flash strobes twice. The first flash adjusts the light quantity.
• While charging the flash,
is displayed.
• You cannot use the flash during burst shooting.
• [On] or [Slow Synchro] is not available when the camera is in Intelligent Auto Adjustment mode.
• [Auto] or [Slow Synchro] is not available when the camera is in Backlight Correction HDR mode.
• [Flash] is set to [Off] in the following situations:
– In Intelligent Sweep Panorama mode
– In Anti Motion Blur mode
– In Hand-held Twilight mode
(Auto)
Flashes when shooting in low light or backlight conditions.
(On)
Flash always operates.
(Slow
Synchro)
Flash always operates.
The shutter speed is slow in a dark place to clearly shoot the
background that is out of flash light.
(Off)
Flash does not operate.
Notes
z
When the “White circular spots” appears in flash
photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camera’s flash, they appear as white circular spots.
How can the “White circular spots” be reduced?
• Light the room and shoot the subject without a flash.
• Select
(High Sensitivity) mode in Scene Selection. (The flash is set to [Off].)
Camera
Subject
Particles (dust, pollen, etc.)
in the air