Ta
ble
of
Op
e
MENU/Settin
In
115
GB
TransferJet
You can select TransferJet communication settings. TransferJet is a close-up, wireless transfer
technology that allows data to be transferred by closely aligning two products that you want to
communicate with each other. To find out whether your camera is equipped with the TransferJet
function, check for the
(TransferJet) mark on the bottom of the camera.
Using a Memory Stick with TransferJet (sold separately) allows images to be transferred
between TransferJet-compatible devices.
For more details on TransferJet, see the Operating Instructions supplied with Memory Stick with
TransferJet.
1
t
(Settings)
t
(Main Settings)
t
[TransferJet]
t
desired mode
• [TransferJet] is always set to [Off] during Easy Mode.
• While aboard an airplane, set [TransferJet] to [Off]. In other cases, always follow all regulations
governing the location in which the camera is being used.
• The connection is cut if transfer cannot be made within about 30 seconds. If this happens, select [Yes]
and again align two
(TransferJet) marks on the camera and another device.
• Memory Stick with TransferJet and camera models with TransferJet are not sold in some countries and
regions due to local laws and regulations.
• Set the [TransferJet] function to [Off] in countries and regions other than where you purchased your
camera. Depending on the country or region, if you use the TransferJet function, you may be liable due to
local restrictions on transmission of electromagnetic waves.
On
Communicates using TransferJet.
Off
Does not communicate using TransferJet.
Notes
z
What is TransferJet?
TransferJet allows you to share images by sending and receiving
image data. Insert a Memory Stick with TransferJet in your camera
and align two
(TransferJet) marks
of the camera and another
device that supports this function.
For details on image transfer, see page 79.
