Ta
ble
of
Op
e
MENU/Settin
In
66
GB
• The Scene Recognition function does not operate when you shoot images using Digital Zoom.
• [Scene Recognition] is set to [Auto] in the following situations:
– During burst shooting
– When the Smile Shutter function is activated
– When [Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People]
• The available flash settings are [Auto] and [Off].
•
(Twilight using a tripod) scenes sometimes cannot be recognized in an environment where vibrations
are transferred to the camera even though it is fixed on a tripod.
• Sometimes a slow shutter results when a scene is recognized as a
(
Twilight using a tripod). Keep the
camera still during shooting.
• The Scene Recognition icon appears regardless of the [Display Settings].
• These scenes may not be recognized depending on the situation.
Notes
z
Shooting two images with different settings and
selecting the one you like (Advanced mode)
In [Advanced] mode, the camera shoots two images consecutively with the settings
differing as follows when it recognizes (Twilight),
(Twilight Portrait),
(Twilight
using a tripod), (Backlight) or
(Backlight Portrait) scenes, which tends to blur.
You can select the desired image from the two images shot.
* When flash is set to [Auto].
First Image
*
Second Image
Shoots in Slow Synchro
Shoots with sensitivity increased and shake
reduced
Shoots in Slow Synchro with the face
which the flash strobes on as guide
Shoots with sensitivity increased with the face as
guide and shake reduced
Shoots in Slow Synchro
Shoots with even slower shutter speed without
increasing sensitivity
Shoots with the flash
Shoots with the brightness and contrast of the
background adjusted
Shoots with the face which the flash
strobes on as guide
Shoots with the brightness and contrast of the
face and the background adjusted
z
What is the Anti Blink function?
When set to [Advanced], the camera automatically shoots two images consecutively* when
it recognizes
(Portrait). The camera will select, display, and record the image which the
eyes are not blinked automatically. If the eyes are closed in both images, the message
“Blinked eye detected” is displayed.
* except when the flash strobes/when the shutter speed is slow