1-2
DSC-W55_L2
1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note 1:
When replacing the SY-176 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-176 board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
Copies all images in the internal memory to a “Memory Stick Duo”.
1
Insert a “Memory Stick Duo” having 64 MB or larger capacity.
2
Select [OK] with
v
on the control button, then press
z
.
The message “All data in internal memory will be copied Ready?” appears.
3
Select [OK] with
v
, then press
z
.
Copying starts.
To cancel the copying
Select [Cancel] in step
2
or
3
, then press
z
.
• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory Tool) (page 54).
• When you copy the data in the internal Memory to the “Memory Stick Duo”, all the data will be copied.
You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be
copied.
• Even if you copy data, a
(Print order) mark is not copied.
Copy
This item appears only when a “Memory Stick Duo” is inserted in the camera.
Formats the “Memory Stick Duo”. A commercially available “Memory Stick Duo” is already
formatted, and can be used immediately.
• Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected
images.
1
Select [OK] with
v
on the control button, then press
z
.
The message “All data in Memory Stick will be erased Ready?” appears.
2
Select [OK] with
v
, then press
z
.
The format is complete.
To cancel the formatting
Select [Cancel] in step
1
or
2
, then press
z
.
Format
