3-2
DSC-D700 (UC,CE)
4. Entering the camera test mode
1. Set the camera power switch to the CAM mode.
2. Set the LCD button to ON.
3. Press the MENU button.
4. Press the AE-LOCK button.
5. Press the release button.
6. Press the EXECUTE button to display a DBG MENU item on the 2.5-inch
LCD screen while pressing the
(DOWN) button.
7. The red-displayed item in the menu is a currently selected item. The item can be
selected using the
and
buttons. To change the contents of the selected
item, press the EXECUTE button and select the item as required. To cancel the
item selection, press the EXIT button.
5. Exiting the camera test mode
1. To exit the test mode with the DBG MENU item displayed on the 2.5-inch LCD screen,
press the EXIT button several times until all menu items disappear on the LCD display.
2. When the adjustment test mode is exited, set the power switch to OFF to enter
the factory-setting state.
n
In this test mode, the register setting of a microcomputer in a camera is changed
directly. Therefore, the camera may not properly operate when ones other than
the specified item are changed incorrectly. The operations except items described
on this manual are not performed absolutely.
3. Power connection method
Insert an AC coupler into the battery holder of the unit using recommended AC
adaptor AC-V700 and supply the power from the AC adaptor.
1. IF-717 board adjustment
2. Camera system adjustment
AC-V700
AC coupler
AC cord
Video cord
Monitor
Oscilloscope
426 mm
Pattern box
ISO
USER
SIZE
QUAL
DRIVE
WB
AE
Summary of Contents for Cyber-shot PRO DSC-D700
Page 1: ...Vol 1 1st Edition DIGITAL STILL CAMERA DSC D700 SERVICE MANUAL ...
Page 6: ......
Page 88: ......
Page 114: ......
