5
Clean the flash surface before use
The heat of flash emission may cause dirt on the
flash surface to become discolored or to stick to
the flash surface, resulting in insufficient light
emission.
Do not get the camera wet
When taking pictures outdoors in the rain or
under similar conditions, be careful not to get the
camera wet. If moisture condensation occurs, see
page 72 and follow the instructions on how to
remove it before using the camera.
Do not expose the camera to sand or
dust
Using the camera in sandy or dusty locations may
cause malfunction.
Note on the camera locations
Do not use the camera near a location that
generates strong radio wave or emits radiation.
The camera may not be able to record or play
back properly.
The pictures used in this manual
The photographs used as examples of pictures in
this manual are reproduced images, and are not
actual images shot using this camera.
Trademarks
•
“Memory Stick,”
and “MagicGate
Memory Stick” are trademarks of Sony
Corporation.
•
“Memory Stick Duo” and
are trademarks of Sony Corporation.
•
“Memory Stick PRO” and
are trademarks of Sony Corporation.
•
“MagicGate” and
are
trademarks of Sony Corporation.
•
Microsoft and Windows are registered
trademarks of the U.S. Microsoft Corporation
in the United States and other countries.
•
Macintosh, Mac OS, iBook and Power Mac are
trademarks or registered trademarks of Apple
Computer, Inc.
•
Pentium is a trademark or a registered
trademark of Intel Corporation.
•
In addition, system and product names used in
this manual are, in general, trademarks or
registered trademarks of their respective
developers or manufacturers. However, the
™
or ® marks are not used in all cases in this
manual.
How to hold the
camera
When shooting an image with the camera, be
careful not to obstruct the flash or the lens with
your fingers.