57
Enj
o
yi
ng
im
ages on you
r co
m
p
ut
er
a
Installing the USB driver
1
Turn on your computer, and set the
supplied CD-ROM into the CD-ROM
drive.
The model selection screen appears.
2
Click [Cyber-shot] on the model
selection screen.
The installing menu screen appears.
3
Click [USB Driver].
The “USB Driver” screen appears.
4
Double-click the icon of the hard disk
containing the OS to open the screen.
5
Drag and drop the following two files
from the screen opened in step 3 into the
System Folder icon in the screen opened
in step 4.
• Sony USB Driver
• Sony USB Shim
6
When the message for confirmation is
shown, click [OK].
7
Restart your computer, then remove the
CD-ROM.
b
Connecting your camera to
your computer
For details, see page 51.
Disconnecting the USB cable from
your computer or removing the
“Memory Stick” from your camera
during USB connection
Drag and drop the drive icon or the
“Memory Stick” icon to the “Trash” icon,
then disconnect the USB cable or remove
the “Memory Stick.”
•
If you are using Mac OS X v10.0, disconnect
the USB cable, etc., after you have turned your
computer off.
c
Copying images
1
Double-click the newly recognized icon
on the desktop.
The contents of the “Memory Stick”
inserted in your camera appear.
2
Double-click [DCIM].
3
Double-click the folder containing the
desired image files.
4
Drag and drop the image files to the hard
disk icon.
The image files are copied to your hard
disk.
•
See page 55 for details about the image file
storage destinations and file names.
d
Viewing the images on your
computer
1
Double-click the hard disk icon.
2
Double-click the desired image file in
the folder containing the copied files.
The image file opens.
• Close down all applications running on
the computer before installing the USB
driver and application.
•
You can use the “ImageMixer Ver.1.5 for Sony”
software to copy images to your computer and
to view images on your computer. See the
operation manual supplied with the CD-ROM
for details about the installation method, or see
the software’s help files for the operation
method.
•
“ImageMixer” is not compatible with Mac
OS X.
•
“Image Transfer” cannot be used with
Macintosh.