66
Warnings and messages
The following messages appear on the LCD screen.
Message
Meaning/Corrective Action
NO MEMORY STICK
• Insert a “Memory Stick” (page 17).
SYSTEM ERROR
• Turn the power off and on again (page 14).
MEMORY STICK ERROR
• The inserted “Memory Stick” cannot be used in your camera (page 74).
• The “Memory Stick” is damaged, or the terminal section of the “Memory Stick” is dirty.
• Insert the “Memory Stick” correctly (page 17).
MEMORY STICK TYPE ERROR
• The inserted “Memory Stick” cannot be used in your camera (page 74).
FORMAT ERROR
• The “Memory Stick” format failed. Format the “Memory Stick” again (page 45).
MEMORY STICK LOCKED
• The write-protect switch on the “Memory Stick” is set to the LOCK position. Set it to the recording position
(page 74).
NO MEMORY SPACE
• The capacity of the “Memory Stick” is insufficient. You cannot record images. Delete unnecessary images
(page 44).
NO FILE IN THIS FOLDER
• No images have been recorded in this folder.
FOLDER ERROR
• A folder with the same first three digits number already exists in the “Memory Stick.” (For example:
123MSDCF and 123ABCDE) Select other folders, or create a new folder.
CANNOT CREATE MORE
FOLDERS
• The folder whose first three digits of the name is “999” exists in the “Memory Stick.” You cannot create any
folders.
CANNOT RECORD
• The camera cannot record images in the selected folder. Select a different folder (page 26).
FILE ERROR
• An error occurred while playing back the image.
FILE PROTECT
• The image is write-protected by another device. Release the protection by another device.
IMAGE SIZE OVER
• You are attempting to play back an image of a size that cannot be played back on your camera.
INVALID OPERATION
• You are attempting to assign the print (DPOF) mark to a file that was created by another device.
• The battery level is low or zero. Charge the batteries (page 10). Depending on the conditions of use, the indicator
may flash even though there are still 5 to 10 minutes of remaining battery time left.
LENS COVER CLOSED
• The lens cover is closed when the mode switch is set to
or
.