HELP
DCR-SR90E/SR100/SR100E_L2
HELP
Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown.
THE METHOD OF ATTACHMENT OF FP-439 FLEXIBLE BOARD
Adhesive tape
Adhesive tape
Adhesive tape
1
Fold dotted line parts of the FP-439 flexible board
as shown in figure.
2
Put the FP-432 flexible board on the FP-439
flexible board.
6
Put the adhesive sheet and FP-439 flexible
board on the hinge assy according to the
position of the boss and insert the switch of
the FP-432 flexible board as shown in figure.
A
Fold
Hinge assy
3
Pass the FP-439 flexible board through
the
FPC clamp(H)
.
4
Install the
FPC clamp(H)
in the hinge assy.
FPC clamp(H)
FPC clamp(H)
Adhesive tape
5
Roll the t
he FP-439 flexible board 1.5 times,
in the direction of arrow
A
.
Switch
FP-432
Switch
Boss
