Sony D-E505, Service Manual

– 2 –

ATTENTION  AU  COMPOSANT  AYANT  RAPPORT

À  LA  SÉCURITÉ!

LES  COMPOSANTS  IDENTIFIÉS  PAR  UNE  MARQUE  

!

SUR  LES  DIAGRAMMES  SCHÉMATIQUES  ET  LA  LISTE
DES  PIÈCES  SONT  CRITIQUES  POUR  LA  SÉCURITÉ
DE  FONCTIONNEMENT.  NE  REMPLACER  CES  COM-
POSANTS  QUE  PAR  DES  PIÈCES  SONY  DONT  LES
NUMÉROS  SONT  DONNÉS  DANS  CE  MANUEL  OU
DANS  LES  SUPPLÉMENTS  PUBLIÉS  PAR  SONY.

SAFETY-RELATED  COMPONENT  WARNING!!

COMPONENTS  IDENTIFIED  BY  MARK  

!

  OR  DOTTED

LINE  WITH  MARK  

!

  ON  THE  SCHEMATIC  DIAGRAMS

AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.

Flexible Circuit Board Repairing

• Keep the temperature of the soldering iron around 270 ˚C dur-

ing repairing.

• Do not touch the soldering iron on the same conductor of the

circuit board. (within 3 times)

• Be careful not to apply force on the conductor when soldering

or unsoldering.

Notes on chip component replacement

• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.

This appliance is classified as a CLASS 1 LASER product.
The CLASS 1 LASER PRODUCT MARKING is located on
the rear exterior.

TABLE  OF  CONTENTS

1.

SERVICING  NOTES

...............................................

3

2.

GENERAL

...................................................................

4

3.

DISASSEMBLY

.........................................................

7

4.

SERVICE  MODE

......................................................

8

5.

ELECTRICAL  ADJUSTMENTS

.........................

9

6.

DIAGRAMS

6-1. Block Diagram – MAIN Section – ................................. 13
6-2. Block Diagram – POWER SUPPLY Section – .............. 17
6-3. IC Pin Function Description ........................................... 19
6-4. Printed Wiring Boards (Suffix-11) ................................. 22
6-5. Schematic Diagram (Suffix-11) ...................................... 25
6-6. Schematic Diagram (Suffix-12) ...................................... 29
6-7. Printed Wiring Board (Suffix-12) ................................... 33

7.

EXPLODED  VIEWS

................................................ 41

8.

ELECTRICAL  PARTS  LIST

............................... 44

CAUTION

Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.

Discrimination of MAIN board

1-671-585-11

or

1-671-585-12

– MAIN BOARD (Side A) –

MAIN Board

1-671-585-11

1-671-585-12

CD Mechanism Type

CDM-2911DBB

CDM-2911DBB

or

CDM-2911EBA

Optical Pick-Up Name

DAX-11D

DAX-11D

or

DAX-11E