16
B
Installing in a car
Console box
Polarity of the plug
(EIAJ standards)
Where to place your CD
player and rotary
commander
• Install the CD player and the supplied
rotary commander in a flat location which:
– does not interfere with your driving.
– is not dangerous for passengers.
– does not interfere with the glove box lid
or ashtray.
– is stable, and where nothing around it
may interfere with installation.
• Do not install the CD player and rotary
commander near heat sources or where
subject to direct sunlight, excessive dust,
or moisture (especially on a dashboard).
Please understand that we will not incur any
obligations for troubles caused by incorrect
installation.
If you have any questions or problems
concerning your CD player, please contact
your nearest Sony dealer.
Mounting your CD
player
Attach the CD player to the console box with
the supplied Velcro tapes.
Notes
• Do not affix Velcro tapes to the name plate
or the lid of the battery compartment.
• When you are going to park your car for a
long period of time, remove the CD player
from the Velcro tapes so that it will not be
exposed to direct sunlight.
To route the cord
Use the supplied spiral tube to route the
cords so that they do not interfere with your
driving.
Note on the car battery cord
The 4.5V DC plug supplied with car battery cord
conforms to the proposed standards of the
Electronic Industries Association of Japan (EIAJ).
Do not connect it to other players.
Bottom of the CD
player