Symptom
Cause and/or corrective action
Playback starts from the point you
stopped (resume function).
The resume function is working. To start play from the first
track, press
while the player is stopped until the first track
starts playing (
page 16), or open the lid of the player. Or,
remove all power sources, and then insert the battery or connect
the AC power adaptor again.
During playback of an ATRAC
CD or MP3 CD, the CD does not
rotate but you can hear the sound
normally.
This player is designed to stop the rotation of an ATRAC CD
or MP3 CD during playback to reduce the power consumption.
The player is not malfunctioning.
“No File” appears on the display
after you press
or when the lid
of the player is closed.
There are no
ATRAC
/MP3 files on the CD-R/CD-RW.
A CD-R/CD-RW from which the data has been erased is being
used.
The CD is dirty.
The LCD display becomes hard to
see or slows down.
You are using your CD player at high temperatures (above
40°C/104°F) or at low temperatures (below 0°C/32°F). At
room temperature, the display will return to its normal
operating condition.
is flashing quickly on the
display of the remote control, and
you cannot locate the beginning
of the track or a specific point in
the track.
The CD player has entered the preparation stage of Bookmark
play. Change the PLAY MODE setting to normal play (no
display) (
page 20).
Even though you have not selected
Bookmark play, (Bookmark)
flashes.
If you have selected a playback option other than Bookmark
play, (Bookmark) flashes.
Play stopped abruptly.
The off timer has been set. Change the setting of “TIMER” to
“OFF” (
page 27).
The rechargeable battery or the dry battery is used up
completely. Charge the rechargeable battery (
page 11),
or replace the dry battery with a new LR6 (size AA) alkaline
battery (
page 12).
32
D-NE830/NE830LS.GB.2-653-429-12(1)
Summary of Contents for D-NE830
Page 38: ......
Page 39: ......
Page 40: ...Sony Corporation Printed in Malaysia Printed on 100 recycled paper ...
