30
GB
*1 DVD VIDEOs/DVD-RWs/DVD-Rs only.
*2 DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs
only.
*3 DATA CDs only.
• If there is no disc in the system, “NO DISC” appears
in the front panel display.
• The Instant Replay function is useful when you want
to review a scene or dialogue that you missed.
• The Instant Advance function is useful when you
want to pass over a scene that you don’t want to
watch.
• You may not be able to use the Instant Replay or
Instant Advance function with some scenes.
Resuming playback from the
point where you stopped the
disc (Resume Play)
When you stop the disc, the system remembers
the point where you pressed
x
and “RESUME”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system enters standby mode by
pressing
"
/
1
.
1
While playing a disc, press
x
to stop
playback.
“RESUME” appears in the front panel
display, so you can restart the disc from the
point where you stopped the disc.
If “RESUME” does not appear, Resume
Play is not available.
2
Press
H
.
The system starts playback from the point
where you stopped the disc in Step 1.
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [OFF] (page 70), the resume point is cleared
when you change the function by pressing
FUNCTION.
• The point where you stopped playing may be cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
– you change the function by pressing FUNCTION.
– you disconnect the AC power cord (mains lead).
• For DVD-RWs in VR mode, CDs, and DATA CDs,
the system remembers the resume playback point for
the current disc.
The resume point is cleared when:
– you eject the disc.
– the system enters standby mode (DATA CD only).
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not work with some discs.
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• To play from the beginning of the disc, press
x
twice,
then press
H
.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
This system stores the point where you stopped
the disc for up to 40 discs and resumes playback
the next time you insert the same disc. If you
store a resume playback point for the 41st disc,
the resume playback point for the first disc is
deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see “[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)” (page 70).
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
is set to [ON] (page 70) and you playback a recorded
disc such as DVD-RW, the system may playback
other recorded discs from the same resume point. To
play from the beginning, press
x
twice and then press
H
.
Replay the previous scene*
1
(instant
replay) during
playback.
Briefly fast forward the
current scene*
2
(instant
advance) during
playback.
Go to the next or previous
album*
3
ALBUM + or – during
playback.
Note
Tip
To
Press
Note
Tip
Note
