28
GB
To connect the AUDIO OUT jacks of a TV to the VIDEO/SAT (AUDIO IN)
jacks of this system
Connect a TV to the VIDEO/SAT (AUDIO IN) jacks using an audio cord (not supplied). When
connecting a cord, be sure to match the color-coded sleeves to the appropriate jacks on the components.
• Be sure to make connections securely to avoid hum and noise. If using the VIDEO/SAT jacks distorts the sound,
change the attenuate setting (page 74).
• If your TV does not have AUDIO OUT jacks, you cannot output the TV sound from the speakers of this system.
• If you connect a TV to the VIDEO/SAT (AUDIO IN) jacks, other components, such as a VCR, cannot be
connected.
• To listen to the TV sound, select the function by pressing FUNCTION. For details, see page 64.
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby
Pro Logic,” “Dolby Pro Logic II MOVIE,” or “Dolby Pro Logic II MUSIC” sound field (page 62).
• When you select the “NIGHT” sound field (page 62), the sound is output from the front speakers only.
To change the color system (PAL or NTSC)
(Asian, Australian, and Middle Eastern models only)
Depending on the TV to be connected, you may be required to select either PAL or NTSC of the
system.
The initial setting of the system for Australian and Middle Eastern models is PAL.
The initial setting of the system for Asian models is NTSC.
Note
Tip
R
AUDIO
OUT
L
SPEAKER
COAXIAL
FM
75
Y
R AUDIO IN
VIDEO IN
L
PB/CB
PR/CR
DVD ONLY
VIDEO/SAT
COMPONENT VIDEO OUT
AM
VIDEO
S VIDEO (DVD ONLY)
MONITOR OUT
FRONT R
FRONT L
SURR R
SURR L
CENTER
WOOFER
TV
To VIDEO/SAT
(AUDIO IN)
White (L/audio)
Red (R/audio)
Summary of Contents for DAV-DZ200
Page 104: ...Sony Corporation Printed in China ...