80
GB
x
[LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
x
[LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
(This settings appear except when you set
[SURROUND] to [NONE] in the [SIZE]
setting.)
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press /– on the remote.
x
[TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
Adjusting the speaker level by
using the test tone
1
Press
DISPLAY when the system is
in stop mode.
The Control Menu appears.
2
Press
X
/
x
to select
[SETUP],
then press ENTER.
The options for [SETUP] appear.
3
Press
X
/
x
to select [CUSTOM], then
press ENTER.
The Setup Display appears.
4
Press
X
/
x
repeatedly to select
[SPEAKER SETUP], then press ENTER
or
c
.
5
Press
X
/
x
repeatedly to select [TEST
TONE], then press ENTER or
c
.
6
Press
X
/
x
repeatedly to select [ON],
then press ENTER.
You will hear the test tone from each
speaker in sequence.
7
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using
C
/
X
/
x
/
c
.
The test tone is emitted from only the
speaker which you are adjusting.
8
Press ENTER when you have finished
making adjustments.
9
Press
X
/
x
repeatedly to select [TEST
TONE], then press ENTER.
10
Press
X
/
x
repeatedly to select [OFF],
then press ENTER.
• When you adjust the speaker settings, the sound cuts
off for a moment.
[L]
0 dB
Set this between –6 dB and 0 dB
in 1 dB increments.
[R]
0 dB
Set this between –6 dB and 0 dB
in 1 dB increments.
[CENTER]
0 dB
(appears when you
set [CENTER] to
[YES] in the [SIZE]
setting.)
Set this between –6 dB and +6 dB
in 1 dB increments.
[SUBWOOFER]
0 dB
Set this between –6 dB and +6 dB
in 1 dB increments.
[L]
0 dB
Set this between –6 dB and +6 dB in
1 dB increments.
[R]
0 dB
Set this between –6 dB and +6 dB in
1 dB increments.
[OFF]
The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
Note
Summary of Contents for DAV-DZ300
Page 99: ......
Page 100: ...Sony Corporation Printed in China ...
