52
US
Presetting Radio
Stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
Tip
• You can operate the tuner function by observing the
following display on the TV screen.
1
Press FU/– repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
2
Press and hold /– until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3
Press SYSTEM MENU.
4
Press
X
/
x
repeatedly until “MEMORY”
appears in the front panel display.
5
Press
or
c
.
A preset number appears in the front panel
display.
6
Press
X
/
x
to select the preset number
you want.
Tip
• You can select the preset number directly by
pressing the number buttons.
7
Press .
“COMPLETE” appears in the front panel
display, and the station is stored.
8
Repeat Steps 2 to 7 to store other
stations.
9
Press SYSTEM MENU.
The system menu turns off.
To change the preset number
Restart from Step 2.
To change the AM tuning interval
(except for Russian and Middle
Eastern models)
The AM tuning interval can be set to either
10 kHz or 9 kHz.
To change the AM tuning interval, first tune in
any AM station, then turn off the system by
pressing
"
/
1
on the unit. While holding down
>
on the unit, press
"
/
1
on the unit to turn on
the power. If you change the interval, AM preset
stations will be erased.
To reset the interval, repeat the same procedure.
Tuner
FM 10 : 88.00 MHz
SONY RADIO
FM
Station name
Current band and preset number
Current station
