Contr
o
l f
o
r HDMI/
Extern
al A
u
dio
D
e
vic
e
67
US
Simply by matching the ID of the unit and the
S-AIR sub unit, you can establish sound
transmission.
To set the ID of the unit
1
Press
"
/
1
on the unit.
The system turns on.
2
Press SYSTEM MENU.
3
Press
X
/
x
repeatedly until “S-AIR ID”
appears in the front panel display, then
press
or
c
.
4
Press
X
/
x
to select the desired ID.
You can select any ID (A, B, or C).
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
7
Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
Tip
• To confirm the current ID, perform Steps 1 to 3
above. When you pair the unit with the S-AIR sub
unit (page 69), “(PAIRING)” appears beside ID in
the front panel display.
To set the ID of the surround
amplifier
Refer to the operating instructions of the
surround amplifier.
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
To use multiple S-AIR main units
You can use multiple S-AIR main units by
setting a different ID for each component.
You can enjoy the system’s sound by using the
S-AIR receiver. The S-AIR receiver can be
placed in another room for enjoying the
system’s sound there.
For details of the S-AIR receiver, refer to the
operating instructions of the S-AIR receiver.
1
Press SYSTEM MENU.
2
Press
X
/
x
repeatedly until “S-AIR
MODE” appears in the front panel
display, then press
or
c
.
Establishing sound
transmission between the unit
and S-AIR sub unit
(ID setting)
For the surround amplifier
For the S-AIR receiver
ID A
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR sub unit
Enjoying the system’s sound in
another room
For the S-AIR receiver
Other S-AIR
main unit
S-AIR main unit
(This unit)
ID A
S-AIR sub unit
ID A
S-AIR
sub unit
ID B
S-AIR sub unit
ID A
ID B
