70
US
Note
• This setting is effective only when
“PROGRESSIVE” is selected by using VIDEO
FORMAT (page 22).
Use this to set up playback related and other
settings.
Select [CUSTOM SETUP] in the Setup Display.
For details, see “Using the Setup Display”
(page 66).
The default settings are underlined.
x
[HDMI CONTROL]
Switches the HDMI CONTROL function on or
off. This function is available when you connect
the system and TV with the HDMI cord. For
details on this function, see the HDMI
CONTROL Guide (supplied separately).
Note
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection]
appears and you can not set to [ON].
x
[PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
[FULL]
Select this when you can change
the aspect ratio on your TV.
[NORMAL]
Select this when you cannot
change the aspect ratio on your
TV. Shows a 16:9 aspect ratio
signal with black bands on left and
right sides of the image.
16:9 aspect ratio TV
Custom Settings
[CUSTOM SETUP]
[OFF]
Sets the HDMI CONTROL
function to off.
[ON]
Sets the HDMI CONTROL
function to on.
You can operate mutually
between components that are
connected with the HDMI cord.
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
MULTI-DISC RESUME:
CUSTOM SETUP
AUTO
PAUSE MODE:
OFF
HDMI CONTROL:
OFF
TRACK SELECTION:
ON
AUDIO DRC:
OFF
AUDIO (HDMI):
OFF
