Sony DAV-HDZ485 Operating Instructions Manual Download

Page: 62 / 104

VIDEO,” TV sound is output from the system
speakers automatically.

• While you are watching the TV and the

function of the system is switched to “DVD,”
sound of the “DVD” function is output from
the system speakers; TV sound is not output
via the TV speakers.

• You can control the system’s volume by the

remote of the TV.

• If you turn the system off or set the function of

the system to other than “TV/VIDEO” or
“DVD,” TV sound is output from the TV
speakers.

You can also operate the System Audio Control
function via the TV menu. For details, refer to
the operating instructions of the TV.

Note

• While the TV is in PAP (picture and picture) mode,

the System Audio Control function will not work.
When the TV exits PAP mode, the output method of
the TV returns to the one before PAP mode.

Tip

• You can connect the system and the TV audio

digitally. For details, see page 21.

(Volume Limit)

If you change the output method of the TV to the
system speakers via the TV menu (or by
pressing THEATER), loud sound may be output
depending on the volume level of the system.
You can prevent this by limiting the maximum
level of the volume. For details, see “[VOLUME
LIMIT]” (page 52).

(Language Follow)

When you change the language for the on-screen
display of the TV, the system’s on-screen
display language is also changed. However,
when the system’s on-screen display is
displayed, this function does not work.

Using the DIGITAL MEDIA
PORT Adapter

The DIGITAL MEDIA PORT (DMPORT)
adapter is for enjoying sound from a portable
audio source or computer. By connecting a
DIGITAL MEDIA PORT adapter, you can
enjoy sound from the connected component on
the system.
Available DIGITAL MEDIA PORT adapters
vary in each area.
For details on connecting the DIGITAL MEDIA
PORT adapter, see page 22.

Note

• Do not connect an adapter other than the DIGITAL

MEDIA PORT adapter.

• Do not connect or disconnect the DIGITAL MEDIA

PORT adapter to/from the unit while the system is
turned on.

• When you use the system and the Bluetooth Wireless

Audio Adapter (such as TDM-BT1, not supplied) at
the same time, transmission distance between the
Bluetooth transmitter and Bluetooth Wireless Audio
Adapter may be reduced. In this case, place the
Bluetooth transmitter as far as possible from the
system, or move the Bluetooth Wireless Audio
Adapter closer to the Bluetooth transmitter.

• When you use the system and the Wireless Network

Audio Adapter (such as TDM-NC1, not supplied) at
the same time, place the Wireless Network Audio
Adapter as far as possible from the system.

Press FU/– repeatedly until
“DMPORT” appears in the front panel
display.

Start playback of the connected
component.

The sound and images from the connected
component are played on the system or
connected TV.
For operation details, refer to the operating
instructions of the DIGITAL MEDIA
PORT adapter.

Setting the Maximum Volume
Level of the System

Changing the language for the
on-screen display of the TV

Playing the connected
component on the system