Ad
v
a
nc
ed
Setting
s a
nd Adj
u
stm
e
nts
95
GB
Returning the sound field
settings or radio settings to
the default
1
Turn off the power.
2
Press and hold
"
/
1
on the control unit
about 5 seconds.
“MEMORY CLR” and “PUSH POWER”
appear alternately in the front panel display
about 10 seconds.
3
Press
"
/
1
.
“CLEARING” appears in the front panel
display and the default settings are returned.
After “CLEARED!” appears, the system is
turned off.
Note
• In Step 3, if you do not press
"
/
1
or press any buttons
other than
"
/
1
on the control unit, the system turns
on. The setting is not made.
• When you turn on the system after returning to the
default settings, wait about 20 seconds before turning
on the power by pressing
"
/
1
.
Returning the settings on the
Setup Display to the default
1
Press FUNCTION repeatedly until “DVD”
appears in the front panel display.
2
Press
DISPLAY when the system is in
stop mode.
The Control Menu display appears on the TV
screen.
3
Press
X
/
x
to select
[SETUP], then
press .
The options for [SETUP] appear.
4
Press
X
/
x
to select [RESET], then press
.
5
Press
X
/
x
to select [YES].
You can also quit the process and return to the
Control Menu display by selecting [NO] here.
6
Press .
All the settings explained on pages 87 to 94
return to the default settings. Do not press
[/
1
while resetting the system as it takes a few
seconds to complete.
Note
• When you turn the system on after resetting and no
disc is in the control unit, the guide message appears
on the TV screen. To perform the Quick Setup
(page 18), press
, to return to normal screen, press
CLEAR.
• “BASS,” “MIDDLE,” or “TREBLE” settings are also
returned to the default.
Returning to the Default
Settings
"
/
1
