2-20
DCR-DVD200/DVD200E/DVD300
qg
LCX032AN-5
qs
Lamp guide (40)
qa
Cushion LB (40)
8
FP-603
flexible board
7
Sheet (VF)
qk
LB-084 board
Projected part
q;
Two craws
qj
LCX032AN-5 (16P)
9
Two craws
qd
Illuminator (40)
qf
Prism sheet (40)
Cut-outs
3
Slide the VF slide cabinet assembly and others once
to the deep end, then slant them in the direction of
the arrow
A
to release the claw portion of the VF slide
assembly and finally pull them out in the direction of the
arrow
B
and remove them.
qh
LCD cabinet assembly
A
B
1
Two screws
(M1.7
×
2.5),
lock ace, p2
2
Pull out the VF slide assembly fully
in the direction of the arrow.
5
Screw
(M1.7
×
2.5),
lock ace, p2
6
Remove the LCD cabinet assembly and others from the two dowels and
cut-outs of the VF slide assembly.
4
Screw
(M1.7
×
2.5),
lock ace, p2
Two dowels
VF slide assembly
VF slide Cabinet (upper) assembly
VF slide assembly, etc.
FP-603 flexible
board
Caution
Sheet (VF)
When attach the Sheet (VF),
fold the FP-603 flexible board
as shown in the illustration.
Caution
Be careful not to drop
the Prism sheet (40) and
the Illuminator (40).
Caution
Be careful not to drop
the Cushion LB (40).
2-30.LB-084 BOARD (REMOVING OF THE EVF)-3
