U
si
n
g t
h
e
M
e
nu
Using the Menu
67
FLASH SET
Note that these settings will not function with external flashes that do not support
the following settings.
FLASH MODE
For DCR-HC65:
b
Note
• If the flash is not capable of preventing the red-eye phenomenon, you can select only [ON]
or [AUTO].
FLASH LEVEL
You can select an appropriate flash setting for recording with an external flash
(optional).
b
Note
• The setting returns to [NORMAL] when you disconnect the power source from your
camcorder for more than 5 minutes.
REDEYE REDUC
For DCR-HC85:
SUPER NSPLUS
See page 39 for details.
G
ON
Select to trigger the flash (optional) regardless of the
brightness of the surroundings.
ON
Select to trigger the flash (optional) regardless of the
brightness of the surroundings. The flash pre-flashes to
reduce the red-eye phenomenon.
AUTO
Select to trigger the flash (optional) automatically.
AUTO
Select to trigger the flash (optional) automatically. The flash
pre-flashes to reduce the red-eye phenomenon.
HIGH (
)
Select to make the flash level higher than the standard setting.
G
NORMAL (
)
Standard setting.
LOW (
)
Select to make the flash level lower than the standard setting.
G
OFF
Select to disable the red-eye reduction.
ON (
)
Select to activate the flash before recording to prevent red-eye (p. 31).
,
continued
