149
“
Memory Stick
”
Operations
Preventing accidental erasure
– Image protection
– DCR-IP7BT only
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert the “Memory Stick” into your camcorder.
(
1
)
Set the POWER switch to MEMORY or VCR.
(
2
)
In MEMORY mode, go to step 3.
In VCR mode, select
PB, then press the center
z
on the control button.
(
3
)
Select INDEX, then press the center
z
on the control button. The index screen
appears.
(
4
)
Select
-
MARK, then press the center
z
on the control button. The screen
used for protecting your image appears.
(
5
)
Select the image you want to protect, then press the center
z
on the control
button. The “
-
” mark appears on the protected image.
(
6
)
Repeat step 5 to select other images.
To return to the FN screen
Select EXIT, then press the center
z
on the control button.
To cancel image protection
Select the image for which you want to cancel image protection, then press the center
z
on the control button in step 5 again. The “
-
” mark disappears.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect switch on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
1
3
INDEX
4 – 6
1
2
3
4
5
6
EXIT
RET.
-
MARK
1 / 40
1
2
3
4
5
6
EXIT
DEL
MARK
-
MARK
T
t
-
2 / 40
T
t
-
MARK
MEMORY/
NETWORK
VCR
CAMERA
(CHG)
POWER
OFF
ON
MODE
Summary of Contents for DCR-IP5/IP7BT
Page 195: ......
Page 196: ...Sony Corporation Printed in Japan 3 0 6 9 9 3 3 1 2 ...
