6-16
Note 1:
A page display data
A : XX : XX
Object data
Switch setting:
1) STEADY SHOT switch (Menu display) OFF
Adjusting method:
1) Set data: 01 to page: 1, address: 00.
2) Set data: 41 to page: D, address: 10, and press the PAUSE button
of the adjusting remote commander.
3) Set data: 01 to page: 6, address: 00.
4) Set data: 01 to page: 6, address: 04.
5) Set data: 02 to page: 6, address: 40.
6) Set data: 40 to page: 6, address: 56.
7) Set data: 19 to page: 6, address: 01, and press the PAUSE button
of the adjusting remote commander.
8) Change the data of page: F, address: 2C and adjust so that the
DDS display data (Note 2) lies within the specified value.
9) Press the PAUSE button of the adjusting remote commander.
Note 2:
The right two digits of the display data at the right bottom
side of the EVF and LCD is the object data.
00 XXXX
Object data
11. MAX GAIN Adjustment
Setting the minimum illumination.
If it is not consistent, the image level required for taking subjects in
low illuminance will not be produced (dark).
Subject
Clear chart
(Color bar standard picture frame)
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
DDS display of EVF or LCD, or page:
A display data of the adjusting remote
commander
Specified Value
F
2C
70 to 78 (NTSC)
6C to 74 (PAL)
>
>
Processing after Completing Adjustments
1) Set data: 00 to page: D, address: 10, and press the PAUSE button
of the adjusting remote commander.
2) Set data: 00 to page: 1, address: 00.
3) Set data: 00 to page: 6, address: 01, and press the PAUSE button
of the adjusting remote commander.
4) Set data: 00 to page: 6, address: 40.
5) Set data: 00 to page: 6, address: 56.
6) Set data: 00 to page: 6, address: 04.
7) Set data: 00 to page: 6, address: 00.
Summary of Contents for DCR-PC7
