background image

Notes on using the Hard Disk Drive Handycam

Save all your recorded image data

 To prevent your image data from being lost, 

save all your recorded images on external media 

periodically. It is recommended that you save 

the image data on a disc such as a DVD-R 

using your computer (p. 37). Also, you can save 

your image data using a VCR, or a DVD/HDD 

recorder (p. 47).

Do not apply shock or vibration to your 

camcorder

 The hard disk of the camcorder may not be 

recognized, or recording or playback may not 

be possible.

 Especially, during recording/playback, do not 

apply shock. After recording, do not apply 

vibration or shock to the camcorder, while the 

ACCESS lamp is lit.

 When using a shoulder belt (not supplied), do 

not crash the camera against an object.

 Do not use this camcorder in very loud areas. 

The hard disk of the camcorder may not be 

recognized, or recording or playback may not 

be possible.

On the drop sensor

 To protect the internal hard disk from shock 

by dropping, the camcorder has a drop sensor 

function (p. 69). When a drop occurs, or 

under a non-gravity condition, the block noise 

made when this function is activated by the 

camcorder may also be recorded. If the drop 

sensor catches a drop repeatedly, recording/

playback may be stopped.

Notes on battery pack/AC Adaptor

 Be sure to remove the battery pack or the AC 

Adaptor after turning off the POWER switch.

Note on operating temperatures

 When the temperature of the camcorder 

becomes extremely high or extremely low, you 

may not be able to record or play back on the 

camcorder, due to the protection features of the 

camcorder being activated in such situations. In 

this case, a message appears on the LCD screen 

(p. 86).

When the camcorder is connected to a 

computer

 Do not try to format the hard disk of the 

camcorder using a computer. If you do so, your 

camcorder may not operate correctly.

Note on using the camcorder at high 

altitudes

 Do not turn on the camcorder in a low-pressure 

area, where the altitude is more than 3,000 

meters (9,800 feet). Doing so may damage the 

hard disk drive of your camcorder.

Note on disposal/transfer

 If you perform [MEDIA FORMAT] (p. 53) to 

format the hard disk of the camcorder, data 

may not be completely deleted from the hard 

disk. When you transfer the camcorder, it is 

recommended that you perform [ EMPTY] 

(p. 54) to prevent the recovery of your data.  

In addition to the above, when you dispose of 

the camcorder, it is recommended that you 

destroy the actual body of the camcorder.

If you cannot record/play back images, 

perform [MEDIA FORMAT]

 If you repeat recording/deleting images for a 

long time, fragmentation of data occurs on the 

media. Images cannot be saved or recorded. In 

such a case, save your images on some type of 

external media first (p. 37), and then perform 

[MEDIA FORMAT] (p. 53).  

Fragmentation 

 Glossary (p. 107)

Summary of Contents for DCR-SR220D - 120gb Hard Disk Drive Handycam Camcorder
















































































































Reviews: