YORK U3A - INSTRUCTIONS FOR USE OF VIDEO CAMERA page 4
OTHER INSTRUCTIONS FOR OCCASIONAL USE
Normally, these will not be needed. But if necessary…
To charge the battery
The battery in the camera is not needed when the power cable is attached. If for any reason the
battery is required, and needs charging, then simply connect the power cable and leave the POWER
button in the “OFF(CHG)” position. The battery will now be charging, and progress can be seen in
the window on top of the camera.
To change the DV cassette
The cassette in the camera has a 90-minute capacity on the existing cassette (the camera is set up
for LP (Long Play))
It can be overwritten again and again, so will not normally need to be changed. If however, it is
required to change (for example if a recording of the meeting is required to be archived) then this is
done as follows:
- Remove the tripod “mount” from the bottom of the camera, and remove any cables.
