U
si
n
g t
h
e
M
e
nu
Using the Menu
83
USB-PLY/EDT
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or “Memory Stick” in your camcorder on your computer. For details,
refer to “First Step Guide” in the supplied CD-ROM.
DATA CODE
REMAINING
REMOTE CTRL
b
Note
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
REC LAMP
G
STD-USB
Select to view the picture on the “Memory Stick.”
PictBridge
Select to connect the PictBridge compliant printer (p. 104).
USB STREAM
Select to view the picture on the tape.
G
OFF
Select not to display date, time and the camera settings data during
playback.
DATE/TIME
Select to display the date and time during playback (p. 57).
CAMERA DATA
Select to display the camera settings data during playback (p. 57).
G
AUTO
Select to display the remaining tape indicator for about 8 seconds:
• After you select the CAMERA-TAPE mode with the cassette
inserted, and your camcorder calculates the remaining amount of
tape.
• When you touch
(play/pause).
ON
Select to always display the remaining tape indicator.
G
ON
Select when using the Remote Commander supplied with your
camcorder.
OFF
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
G
ON
Select to turn on the camera recording lamp on the front of your
camcorder during recording.
,
continued
Summary of Contents for DCR TRV480 - Digital8 Handycam Camcorder
Page 9: ...9 ...
