118
Printing images on which superimposed a still image by using
MEMORY MIX function
Before operation
•Be sure to use a fully charged battery when using the battery to make prints.
•Insert a recorded “Memory Stick” into your camcorder.
(
1
)
Insert the print cartridge. (p. 106)
(
2
)
Set the POWER switch to MEMORY. Make sure that the LOCK is set to the
right (unlock) position.
(
3
)
Press MEMORY MIX.
The last recorded still image on “Memory Stick” appears on the lower part of
the screen as a thumbnail image.
(
4
)
Press /– to select the still image you want to superimpose.
To see the previous image, press MEMORY –.
To see the next image, press .
(
5
)
Turn the SEL/PUSH EXEC dial to select the desired mode, then press the dial
to set.
The mode changes as follows:
M.CHROM
y
M.LUMI
y
C.CHROM
(
6
)
Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving image.
Turn the SEL/PUSH EXEC dial to adjust the effect. (p. 85)
(
7
)
Open the LCD panel and the printer cover, then make sure that the PRINT
PAPER lamp is flashing slowly. Insert the print paper. (p. 109)
(
8
)
Perform steps 4 to 7 on page 112.
If you press PHOTO after step 6
You can record the image on “Memory Stick.”
Making prints – Standard print
2
3
5
6
M. CHROM
M. LUMI
M. LUMI I I I • • • •
4
MEMORY MIX
100–0021
100–0021
VTR
OFF
MEMORY
CAMERA
(CHARGE
)
100–0021
Still image
Summary of Contents for DCR-TRV720
Page 155: ......
Page 156: ...Sony Corporation Printed in Japan ...