85
“Memory Stick” operations
1
2
4
5
6
M. CHROM
M. LUMI
M. LUMI
M. LUMI
I I I • • • •
I • • • • • •
VTR
OFF
MEMORY
CAMERA
(CHARGE
)
3
MEMORY MIX
100–0021
100–0021
100–0021
100–0021
Superimposing a still image in the “Memory Stick” on a moving
image – MEMORY MIX
Before operation
Insert a Hi8
/Digital8 tape for recording and a “Memory Stick” into your
camcorder.
(
1
)
Set the POWER switch to CAMERA.
(
2
)
Press MEMORY MIX in the standby mode.
The last recorded still image on “Memory Stick” appears on the lower part of
the screen as a thumbnail image.
(
3
)
Press /– to select the still image you want to superimpose.
To see the previous image, press MEMORY –. To see the next image, press
.
(
4
)
Turn the SEL/PUSH EXEC dial to select the desired mode.
The mode changes as follows:
M. CHROM
y
M. LUMI
y
C. CHROM
y
M. OVERLAP
(
5
)
Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving image.
(
6
)
Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM
– The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI
– The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
C. CHROM
– The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
(
7
)
Press START/STOP to start recording.
Still image
Summary of Contents for DCR-TRV720
Page 155: ......
Page 156: ...Sony Corporation Printed in Japan ...
