1
Table of C
on
ten
ts
M
enu Lists
Inde
x
GB
If you see the image below, the device
works correctly.
If you see the image below even after
adjusting the viewfinder, cease using this
product.
If you cannot see images correctly, this
product may be damaged. Contact
your Sony dealer or local authorized
Sony service facility.
7
Select [Run].
If you select [Run Later], the recording
mode screen appears. When you turn on
this product next time, the [Auto 3D Lens
Adjust] screen will appear.
8
Adjust the 3D lens.
Aim this product at a subject to display
it on the screen.
View a subject for which the scale of the
indicator exceeds the
mark, and then
select
.
Do not change the subject until the
adjustment is completed.
Notes
If this product fails to perform [Auto 3D Lens
Adjust], select [Run Again].
Type of subjects that should be
displayed on the screen for [Auto 3D
Lens Adjust]
The scale indicated varies depending on the
subject displayed on the screen.
Subjects that indicate a higher scale:
Distant subjects in bright places such as
outdoors
Subjects farther away than 20 m (65 ft.) from
this product
Subjects with various colors and shapes
Subjects that indicate a lower scale and
result in adjustment failure:
Subjects in night scenes and in dark places
Subjects within 20 m (65 ft.) from this
product
Subjects with few patterns and shapes
Subjects that repeat the same pattern, such as
rows of windows on buildings
Moving subjects
The horizontal line is extremely tilted.
The horizontal line and the vertical lines do not
overlap.
Scale
